Home / Templates / Home Sauna Buyer Readiness Checklist
Free checklist

Home Sauna Buyer Readiness Checklist

A pre-deposit checklist that walks through the seven decisions behind a home sauna purchase, from heat type to the written quote, so nothing is discovered on delivery day.

Download the checklist (.txt)

Reviewed for 2026, updated September 8, 2026.

A home sauna in the five to fifteen thousand dollar range is bought once and lived with for a decade, yet most of the disappointments we hear about were avoidable before the deposit was paid: a cabin that would not fit through the basement door, a circuit that turned out to be shared with the dryer, a quote that quietly excluded assembly. This checklist follows the same seven decisions as our guide at /guide/, in the order they should be made, so each answer narrows the next one.

Print it or keep it open on a phone, tick items as they are settled, and keep the electrician notes and every written quote together with it. The three free planners at /tools/ do the arithmetic for the space, power and running cost lines, and each decision links to a longer article if a line needs more explanation. Nothing here is a substitute for the manufacturer installation manual or local code.

  • Choose between infrared and traditional heat after sitting in both at a spa or showroom, not from photographs or spec sheets.
  • Be honest about how many sessions a week the household will really take, because that number drives the cabin size, the heater and whether the purchase pays back.
  • Pick the room or outdoor site and confirm the cabin, its door swing and a place to cool down all fit with room to move.
  • Measure every doorway, hallway, stair and turn the packed panels must pass through on delivery day.
  • Run the Home Sauna Size and Power Planner at /tools/sauna-size-power-planner/ to get an interior footprint and a minimum circuit for the people who will use it together.
  • Have a licensed electrician confirm the panel has capacity for a dedicated circuit if the cabin needs one, and get the price of that work in writing.
  • Check that the floor is level, tolerates moisture and can carry the cabin weight plus occupants; for outdoor units, plan a prepared base.
  • Plan ventilation: an air inlet, an outlet and a route for warm moist air to leave the room without soaking into drywall.
  • Identify the wood species and grade used inside and out, and ask whether the stock is clear or knotty and how thick the panels are.
  • Inspect joinery, bench supports and how the walls lock together on a display model or in close-up photographs supplied by the seller.
  • Confirm the glass is tempered, ask for its thickness, and check how the door seals, latches and can be opened from inside.
  • For an infrared cabin, ask what emitter type is used, where the panels sit relative to the benches and what the maker claims about EMF, in writing.
  • For a traditional cabin, note the stove rating, the stone capacity and whether the maker permits water on the stones.
  • Ask how long the cabin takes to reach your preferred temperature from a cold room, not from a heated showroom.
  • Estimate the running cost with the Home Sauna Electricity Cost Calculator at /tools/sauna-electricity-cost/ using the rate on your own utility bill.
  • Work out the cost per session and the break-even against your spa or gym at a realistic number of sessions with the calculator at /tools/sauna-cost-per-session/.
  • Read the warranty for separate terms on the cabin, heater and electronics, and find out who actually performs service in your area.
  • Get a written quote that separates the cabin, delivery, assembly, electrical work and any permit, and ask what is excluded.
  • Confirm what the seller means by delivery: curbside drop, room of choice, or full assembly and a test heat.
  • Check the return policy, the restocking fee and who pays return freight before paying a deposit.
  • Ask your home insurer whether a permanently installed heat appliance or an outdoor structure needs to be declared on the policy.
  • Book the electrician for a date before delivery so the circuit is live and inspected when the cabin arrives.
  • Set a care routine for the first month: towels on the benches, a wipe down after each session, and a note of when the wood will next need attention.

Also from Saunluxe